SINGLE Swing Frame Free-Standing Residential Swing Frame 90 X 90 Cypress Timber (swing sold separately)

This swing is made with cypress legs and top beam with oblique swing corner connections.

Oblique, meaning not at a parallel or right angle - the swing legs will sit out on an angle and not straight down like a square (see the pictures).

Specifications

• 2.3m high approx. (height from ground to underside of the beam (hooks level) : 2.1 metres)
• 2 x swing hangers included
• 2 x oblique swing corner connections
• 5 x cypress timber posts 90mm x 90mm
• 4 x ground anchors
• max loading -  weight of 150kg
  more specification on products’ pictures

NOTE: Swing seats are not included

SAFETY RECOMMENDATION:

1. RECOMENDED ‘NO OBSTACLE’ ARROUND THE SWING FRAME
   1.9m  on both sides of the swing frame (min 1.5m)
   2.3 - 3m in front and behind the swing frame
2. SOFT SURFACE
   It is recommended to apply softfall surface (Bark, Rubber) around and under the swing frame that meet Australian standards
3. MAINTANACE:
   Purchasers are responsible for swing set regular inspections and maintenance:
   all parts every 1-3 months: screws, nuts, shackles, hooks, chains, etc - replace them if needed. Maintenance will vary depending on external factors  (e.g. heavy use, coastal location, air pollution, age of equipment).

This single swing frame is designed specifically for residential use and should only be used in this setting. The 1 year warranty applies to residential use when the product is used correctly.

THIS ITEM COMES FLAT PACKED FOR FREIGHT AND WILL BE DELIVERED TO THE NEAREST DEPOT FOR CUSTOMER PICKUP.

Check out our range of disability swings